Fits Pentair
Parts for Pentair Max-E-Glas
Every aftermarket part in our catalog that fits Pentair Max-E-Glas, cross-referenced to the OEM numbers so you can order against the numbers you already have.
3 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Pentair. Model names indicate fitment only.
Pentair Max-E-Glas: 3 aftermarket replacement parts, including Impeller, O-Ring and Strainer Basket. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Pentair original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
3 parts
Fits Gecko
O-Ring, 1-1/2-Inch Metric, Replacement for Gecko 92200140
All 3 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| C105-137PEB | Single-Speed Impeller Assembly for Sta-Rite Inground Pumps | C105-137PEB |
| 92200140 | O-Ring, 1-1/2-Inch Metric, Replacement for Gecko 92200140 | 700103, HD-1017, O-49, SPX1425Z6 |
| C108-33PZ | Pump Strainer Basket for Dura-Glas/Max-E-Glas | C108-33PZ |
Not sure which part on your Pentair Max-E-Glas failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Pentair Max-E-Glas
Are these genuine Pentair parts for the Pentair Max-E-Glas?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Pentair Max-E-Glas. POOLPOINT is not affiliated with Pentair.
Can I get one quote for every part of the Pentair Max-E-Glas?
Yes. Use "Add all 3 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Pentair. The Pentair name and OEM numbers are used to identify fitment only.