Fits Pentair
Parts for Pentair Mini Max Plus
Every aftermarket part in our catalog that fits Pentair Mini Max Plus, cross-referenced to the OEM numbers so you can order against the numbers you already have.
16 parts
Also written as MiniMax Plus · Minimax Plus
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Pentair. Model names indicate fitment only.
Pentair Mini Max Plus: 16 aftermarket replacement parts, including Heat Exchanger, Bushing and Flow Valve. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Pentair original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
16 parts
Fits Pentair
Heat Exchanger without Heads, 250BTU, Replacement for Pentair MiniMax Heaters
Fits Pentair
Wire Kit, Millivolt, for Minimax and Minimax Plus Heaters, Replacement for Pentair
All 16 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 74452 | Heat Exchanger Without Headers for 150,000 BTU Heaters, Replacement for Pentair | |
| 075629 | Heat Exchanger Without Headers for 300,000 BTU Heaters, Replacement for Pentair | |
| 75630 | Heat Exchanger Without Headers for 350,000 BTU Heaters, Replacement for Pentair | |
| 74074 | Heat Exchanger without Heads for 400,000 BTU Heater, Replacement for Pentair | |
| 75628 | Heat Exchanger Without Heads, 200,000 BTU, Replacement for Pentair | |
| 74451 | Heat Exchanger without Heads, 250BTU, Replacement for Pentair MiniMax Heaters | 0754451 |
| 70544 | In/Out Modulator Bushing, 2-Inch, Replacement for Pentair | |
| 471424 | Flow Valve Assembly for MiniMax Heaters, Replacement for Pentair | |
| 70951 | Tube Seal Gasket, Replacement for Pentair | |
| 70994 | Return Header, Replacement for Pentair | |
| 71895 | Rubber Sleeve, 2-Inch, for MiniMax Plus Heaters, Replacement for Pentair | |
| 470184 | Thermostat Knob for MiniMax Heaters, Compatible with Pentair | |
| 072134 | Boiler Drain Valve, 3/4-Inch, Replacement for Pentair | |
| 075511 | Wire Kit, Millivolt, for Minimax and Minimax Plus Heaters, Replacement for Pentair | 604427, 75511, PEN075511 |
| 70416 | Bolt, 3/8-Inch-16 x 1-1/2-Inch, Replacement for Pentair | |
| 72180 | Washer, 3/8-Inch ID x 1-Inch OD, Replacement for Pentair |
Not sure which part on your Pentair Mini Max Plus failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Pentair Mini Max Plus
Are these genuine Pentair parts for the Pentair Mini Max Plus?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Pentair Mini Max Plus. POOLPOINT is not affiliated with Pentair.
Can I get one quote for every part of the Pentair Mini Max Plus?
Yes. Use "Add all 16 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Pentair. The Pentair name and OEM numbers are used to identify fitment only.