Fits Teledyne Laars
Parts for Teledyne Laars LJ
Every aftermarket part in our catalog that fits Teledyne Laars LJ, cross-referenced to the OEM numbers so you can order against the numbers you already have.
7 parts
Also written as Lite2 LJ
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Teledyne Laars. Model names indicate fitment only.
Teledyne Laars LJ: 7 aftermarket replacement parts, including By-Pass, Plate and Plug. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Teledyne Laars original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
7 parts
Fits Teledyne Laars
By-Pass Assembly, 1-1/2-Inch, Without Spring, Replacement for Teledyne Laars
Fits Teledyne Laars
Draft Hood and Vent Cap Adapter Plate for 250,000 BTU Heater, Replacement for Teledyne Laars
Fits Teledyne Laars
Conversion Plug, 115/230 VAC, Replacement for Teledyne Laars
Fits Teledyne Laars
Header Flow Control Shaft, 2-Inch, Replacement for Teledyne Laars
Fits Teledyne Laars
Drain Plug Grommet, 9/16-Inch, Replacement for Teledyne LaarsAll 7 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| R0013100 | By-Pass Assembly, 1-1/2-Inch, Without Spring, Replacement for Teledyne Laars | |
| R0449703 | Draft Hood and Vent Cap Adapter Plate for 250,000 BTU Heater, Replacement for Teledyne Laars | |
| R0366900 | Conversion Plug, 115/230 VAC, Replacement for Teledyne Laars | |
| S0079800 | Header Flow Control Shaft, 2-Inch, Replacement for Teledyne Laars | |
| F0041600 | Bypass Valve Cap Bolt, Replacement for Teledyne Laars | |
| R0057000 | Header Bolt Kit, Replacement for Teledyne Laars | |
| R0316300 | Drain Plug Grommet, 9/16-Inch, Replacement for Teledyne Laars |
Not sure which part on your Teledyne Laars LJ failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Teledyne Laars LJ
Are these genuine Teledyne Laars parts for the Teledyne Laars LJ?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Teledyne Laars LJ. POOLPOINT is not affiliated with Teledyne Laars.
Can I get one quote for every part of the Teledyne Laars LJ?
Yes. Use "Add all 7 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Teledyne Laars. The Teledyne Laars name and OEM numbers are used to identify fitment only.