Fits Jacuzzi
Parts for Jacuzzi Cygnet
Every aftermarket part in our catalog that fits Jacuzzi Cygnet, cross-referenced to the OEM numbers so you can order against the numbers you already have.
10 parts
Also written as Jacuzzi Cygnet
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Jacuzzi. Model names indicate fitment only.
Jacuzzi Cygnet: 10 aftermarket replacement parts, including O-Ring, Ring and Drain Plug. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Jacuzzi original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
10 parts
Fits Jacuzzi
O-Ring, 4-7/8 x 5-1/4 x 3/16-Inch, Compatible with Jacuzzi Cygnet Pumps
Fits Jacuzzi
Strainer Cover Lock Ring, Compatible with Jacuzzi Vector Series LVL Pumps
Fits Jacuzzi
Drain Plug with O-Ring, 1/4-Inch, for CRF25 and CFT25 Pumps, Set of 2
Fits Jacuzzi
Pump Housing with Plugs, 2-Inch, Replacement for Jacuzzi Cygnet Pumps
Fits Jacuzzi
Strainer Basket, Compatible with Jacuzzi Cygnet, LR, SLR, Dominator, CLR and SharkJet Pumps
Fits Jacuzzi
Strainer Cover, Compatible with Jacuzzi Cygnet Pool Pump
All 10 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 47011200R | O-Ring, 1/2-Inch ID, Compatible with Jacuzzi Pumps and Filters | |
| 47035241R | O-Ring, 4-7/8 x 5-1/4 x 3/16-Inch, Compatible with Jacuzzi Cygnet Pumps | |
| 10-1462-07 | Eye Seal Ring for Cygnet, J, JCM, K and KM Series Pumps, Compatible with Jacuzzi | |
| 5063-01 | Strainer Cover Lock Ring, Compatible with Jacuzzi Vector Series LVL Pumps | 42167809R000, 5848 |
| 30060906R2 | Drain Plug with O-Ring, 1/4-Inch, for CRF25 and CFT25 Pumps, Set of 2 | 31160906R2 |
| 5063-47 | Impeller, 1.5 HP, Compatible with Jacuzzi Cygnet Pumps | 05393905R |
| 5063-40 | Pump Housing with Plugs, 2-Inch, Replacement for Jacuzzi Cygnet Pumps | 16110504R |
| 16105215 | Strainer Basket, Compatible with Jacuzzi Cygnet, LR, SLR, Dominator, CLR and SharkJet Pumps | 16105215R |
| 39075310R | Strainer Cover, Compatible with Jacuzzi Cygnet Pool Pump | 39075304R000, 5063-02, 5825, 5848 |
| 5064-10 | Dowel Pin, 1/4 x 1-1/4-Inch, Stainless Steel, Compatible with Jacuzzi Pumps |
Not sure which part on your Jacuzzi Cygnet failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Jacuzzi Cygnet
Are these genuine Jacuzzi parts for the Jacuzzi Cygnet?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Jacuzzi Cygnet. POOLPOINT is not affiliated with Jacuzzi.
Can I get one quote for every part of the Jacuzzi Cygnet?
Yes. Use "Add all 10 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Jacuzzi. The Jacuzzi name and OEM numbers are used to identify fitment only.