Fits Sta-Rite
Parts for Sta-Rite System 2
Every aftermarket part in our catalog that fits Sta-Rite System 2, cross-referenced to the OEM numbers so you can order against the numbers you already have.
3 parts
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Sta-Rite. Model names indicate fitment only.
Sta-Rite System 2: 3 aftermarket replacement parts, including Filter Cartridge, Lock Ring and O-Ring. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Sta-Rite original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
3 parts
Fits Sta-Rite
Filter Cartridge, 125 Sq Ft, for PLM125 Filter, Compatible with Sta-Rite
Fits Sta-Rite
Position Lock Ring, Compatible with Sta-Rite System 3 Modular Filters
Fits SuperPro
O-Ring, 15-1/4-Inch ID, 3/8-Inch Cross Section, for PLM FiltersAll 3 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 27002-0125S | Filter Cartridge, 125 Sq Ft, for PLM125 Filter, Compatible with Sta-Rite | 4686-25 |
| 27001-0054S | Position Lock Ring, Compatible with Sta-Rite System 3 Modular Filters | |
| O-484-9 | O-Ring, 15-1/4-Inch ID, 3/8-Inch Cross Section, for PLM Filters | 27001-0061, 27001-0061S, O-484 |
Not sure which part on your Sta-Rite System 2 failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Sta-Rite System 2
Are these genuine Sta-Rite parts for the Sta-Rite System 2?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Sta-Rite System 2. POOLPOINT is not affiliated with Sta-Rite.
Can I get one quote for every part of the Sta-Rite System 2?
Yes. Use "Add all 3 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
Other Sta-Rite models
All modelsAn equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Sta-Rite. The Sta-Rite name and OEM numbers are used to identify fitment only.