Fits Hayward
Parts for Hayward Hayward Pro Series
Every aftermarket part in our catalog that fits Hayward Hayward Pro Series, cross-referenced to the OEM numbers so you can order against the numbers you already have.
6 parts
Also written as Pro Series
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Hayward. Model names indicate fitment only.
Hayward Hayward Pro Series: 6 aftermarket replacement parts, including Key/Seal Assembly, Lateral and Rebuild. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Hayward original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
6 parts
Fits Hayward
31-Inch Lateral Assembly with Center Pipe for S310S Sand Filter
Fits Hayward
Sand Filter Valve Label Sticker, Multiport Pro & VL SeriesAll 6 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| SPX0714CA | Key/Seal Assembly for SP0714T Vari-Flo XL Multiport Valve | SPX0714CA |
| SX310DA2 | 31-Inch Lateral Assembly with Center Pipe for S310S Sand Filter | SX310DA2, SX310DA2S |
| SPX0710 | Rebuild Kit for Pro and VL Series Multiport Sand Filter Valves | SPX0710 |
| SP0410X602S | Slide Valve for Sand Filter | SP0410X602S |
| SPX0714CA | Spider Gasket Kit for Vari-Flo XL Valve | SP0714T, SPX0714CA |
| SPX0714G | Sand Filter Valve Label Sticker, Multiport Pro & VL Series | SP0714, SP0714T, SP714, SPX0714G |
Not sure which part on your Hayward Hayward Pro Series failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Hayward Hayward Pro Series
Are these genuine Hayward parts for the Hayward Hayward Pro Series?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Hayward Hayward Pro Series. POOLPOINT is not affiliated with Hayward.
Can I get one quote for every part of the Hayward Hayward Pro Series?
Yes. Use "Add all 6 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
An equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Hayward. The Hayward name and OEM numbers are used to identify fitment only.