Fits Aqua Products
Parts for Aqua Products Aquabot
Every aftermarket part in our catalog that fits Aqua Products Aquabot, cross-referenced to the OEM numbers so you can order against the numbers you already have.
14 parts
Also written as AquaBot
POOLPOINT is an independent manufacturer. Not affiliated with, endorsed by or sponsored by Aqua Products. Model names indicate fitment only.
Aqua Products Aquabot: 14 aftermarket replacement parts, including Filter Bag, Roller and Bushing. Every part is made by POOLPOINT in our own factory in China and shipped factory-direct — these are not Aqua Products original parts. MOQ is 50 pcs per part, single-piece samples are available to check fitment, and one quote request can cover every part on this page.
14 parts
Fits Aqua Products
Filter Bag, Fine Mesh, for Aquabot Cleaners, Compatible with Aqua Products
Fits CMP
Filter Bag, Standard Mesh, Compatible with Aqua Products Pool Cleaners
Fits Aqua Products
Drive Track, Blue, Compatible with Aqua Products Aquabot Pool Cleaners
Fits Aqua Products
Propeller for Aquabot Jr. Robotic Pool Cleaner, Compatible with Aqua Products
Fits Aqua Products
Large Pulley Assembly with Washers, Compatible with Aqua Products
All 14 parts — part numbers and OEM cross-references
| Part number | Product name | OEM references |
|---|---|---|
| 8111 | Filter Bag, Fine Mesh, for Aquabot Cleaners, Compatible with Aqua Products | 8101, A8111PK |
| 8112 | Filter Bag, Standard Mesh, Compatible with Aqua Products Pool Cleaners | 58307-300-812, 8111, 8112S, 8200 |
| A3500PK | Roller, Plastic, Compatible with Aqua Products | |
| A3506PK | Stepped Sleeve Roller, 2-Pack, Compatible with Aqua Products | |
| 2600 | Bushing, 0.5-Inch ID, Compatible with Aqua Products | |
| 3201 | Drive Track, Blue, Compatible with Aqua Products Aquabot Pool Cleaners | 25563-800-201 |
| 7005 | Fuse Holder for Aquabot Pool Cleaners | |
| 3400B AQP | Side Plate for Aquabot Pool Cleaners | 3400BLUE AQP |
| 01-0104-4402 | Propeller for Aquabot Jr. Robotic Pool Cleaner, Compatible with Aqua Products | |
| A3605 | Large Pulley Assembly with Washers, Compatible with Aqua Products | APA3605 |
| 11058 | Retainer Ring, Replacement for Aqua Products | |
| A7106PK | Lighted Switch for Aquabot Cleaners | AP7106 |
| A38205MG | Wheel Tube Assembly, 12-Inch, for AquaBot, AquaMax Jr and DuraMax Jr, Replacement for Aqua Products | |
| 11002 | Clevis Pin, Replacement for Aqua Products |
Not sure which part on your Aqua Products Aquabot failed?
Send a photo of the part or the equipment plate. We identify it against the OEM catalog and quote the same day.
Buying parts for the Aqua Products Aquabot
Are these genuine Aqua Products parts for the Aqua Products Aquabot?
No. They are aftermarket replacement parts that POOLPOINT manufactures in its own factory in China. Each one is cross-referenced to the OEM numbers so you can match it to your Aqua Products Aquabot. POOLPOINT is not affiliated with Aqua Products.
Can I get one quote for every part of the Aqua Products Aquabot?
Yes. Use "Add all 14 parts to quote list" on this page, or paste your own list of part numbers — one request covers the whole machine, and you can set a quantity for each part.
What is your MOQ?
50 pcs per SKU for stocked items. Mixed cartons are welcome — you can combine SKUs to reach the order minimum. Samples are handled separately: we can supply a single piece so you can verify fitment before ordering in bulk.
What are your lead times?
Typically 15–25 days after order confirmation, depending on quantity and whether custom packaging is involved.
Other Aqua Products models
All modelsAn equipment model (R405, MasterTemp, Dolphin DX3) is the machine — a part number (SPX1600Z2, 471694) is the component inside it. The numbers listed on each card below are part numbers you can order against; the model above only tells you what they fit.
POOLPOINT is an independent manufacturer. Not affiliated with, sponsored by or endorsed by Aqua Products. The Aqua Products name and OEM numbers are used to identify fitment only.